Manufacture

Our UK manufacturing facility is based at our Group Headquarters at Heage in Derbyshire click here for location.

Roll-forming

Our KeyBEMO^® Roll-former is a state of the art and technically advanced machine. It has a variety of impressive production abilities including the ability to produce roofing sheets in excess of 25 metres that are transportable. This production capability has made us leaders in the field of large format manufacturing.

Curving

Our curving machine has the capability to curve sheets both Convex & Concave; or double waveform in excess of 20m.

We are able to smooth curve:

Convex radius down to:

3.5m (0.9mm Aluminium Material)

Curving to a greater radius is achievable, depending on design criteria. Please contact our technical department to discuss your requirement.

Concave radius down to:

5.0m (Depending on Material Specifications)

Where curving is required in other materials (i.e Copper, Zinc, Coated Steel and Stainless Steel) please consult with our technical department for the curving parameters as they vary slightly from those for aluminium and are dependant on the gauge of the material

On Site Roll-forming

We offer the client on-site production, with our unique portable roll forming machine. This allows for production at roof level or using our new “Roll to Site” facility the Roll-former is able to produce sheets at ground level.

When using the Roll-former at eaves level continual sheets of in excess of 140m long may be produced without the need for welding or end laps.

Site roll forming and curving allow greater flexibility; it reduces transport and lifting costs, and can also provide perfect curving to the "as built" radius and allows for very long sheets to be produced without the need for end laps.